News

For decades, the international community has reached a general consensus on the disposal of solid waste, including express packaging, which is to manage the whole process of solid waste in accordance with the waste hierarchy principle, and to prevent it in advance according to the disposal strategy (try to avoid waste). Reduction, reuse, recycling, energy recovery (incineration power generation, etc.) and harmless treatment. Germany: Legislation standard mandatory recovery Germany issued the "Package Waste Management Measures", suggesting that packaging waste management should be carried out in the order of "reduction, reuse, recycling, final disposal", and set the recycling target and time limit of different packaging waste, mandatory Sexual requirements Packaging manufacturers and distributors are jointly responsible for packaging recycling, and also developed quantitative standards for packaging waste from collection to final disposal. Germany also introduced the "Packaging Recycling and Recycling Law", which requires that in addition to packaging manufacturers, companies engaged in transportation, agency, wholesalers, and retailers must also be responsible for recycling packaging. US: Recycling packaging companies can reduce taxes Since the 1990s, the United States has been paying attention to green packaging. In order to improve the enthusiasm of enterprises for recycling packaging, the US state governments have appropriately exempted corporate-related taxes based on the recycling rate of enterprise packaging. At the same time, the United States also stipulates in the Resource Conservation and Recycling Law that [reducing the consumption of packaging materials and recycling and recycling packaging waste". Japan: Encourage packaging recycling Japan not only develops and implements the "Packaging Recycling Law", but also works on the construction of recycling systems, and encourages the establishment of a large number of recycling stations in the country. After consumers classify packaging waste, the Japanese collection and transportation system will dispose of the classified packaging. The materials are transported to a dedicated processing center for recycling and re-manufacturing by means of timed recycling, collective transfer, and the like.

From Nigeria to the whole of Africa, there is a strong market demand for food packaging machines. In the past five years, with the increase in the number of large and medium-sized retail markets in Nigeria, the demand for commodity packaging has grown rapidly. According to the data, the Nigerian flexible packaging market has sales of 245 million US dollars, which is the second largest soft packaging market in Africa after South Africa. At present, the largest category of Nigerian manufacturing is food, beverages and tobacco, and the three industries have the largest output and contribution in manufacturing. As the world's largest consumer market for MSG chicken and soup, Nigeria's monthly consumption is as high as 10,000 tons; biscuits, instant noodles and other products are equally popular in the market; Nigeria imports about 12,000 tons of tea each year to meet the needs of the domestic market. Beverages are mainly based on beverages with summer heat and thirst, such as mineral water, tea drinks, etc. The rapid growth of young people's mouth has also led to the massive import of carbonated drinks, juices and functional beverages. It is reported that agriculture is the main industry for the development of economy in West African countries. In order to overcome the problem of preservation of crops and improve the current backward distribution of agricultural products, West Africa has vigorously developed food processing industry. The potential demand for local fresh-keeping machinery is expected to be huge. South Africa is a country that lacks cultivated land. The land area suitable for agriculture only accounts for 11% of the country's land area, about 86 million hectares. Among them, more than 80% are pastures, and the area of arable land is only 14 million hectares. Most of them are used to develop animal husbandry, so a large number of imported slaughtering equipment, meat processing equipment and baking equipment are required. From Nigeria to African countries, the demand for packaging machinery has been demonstrated. Firstly, it relies on the unique geographical and environmental resources of African countries. Some African countries have more developed agriculture, but the corresponding local product packaging cannot meet the production and production output. African countries lack companies that can produce high-quality steel. It is impossible to produce qualified food packaging machinery according to demand. Therefore, the demand for packaging machinery in the African market is conceivable. Whether it is large packaging machinery or small and medium-sized food packaging machinery, the demand in African countries is relatively large. As African countries develop manufacturing, the prospects for food packaging machinery and packaging technology are very positive.

Mengyue Packaging Factory, Established in 2001, our company covers an area of over 8, 000 square meters, and has more than 300 skilled employees. We export goods to more than 100 countries and regions, including Europe, America, Africa, Asia and the Middle East. The normal operation of the production workshop ensures the quality of the products. It also requires serious factory regulations and an effective management system. The following is a "factory management system ten principles" organized by a carton factory as an example! 1). Balanced production, scheduling and order 2). Product quality control is powerful 3). Raw and auxiliary materials, timely supply 4). Strict discipline and strict assessment 5). The equipment is in good condition and is working normally. 6). Safety first, eliminate hidden dangers 7). Stacked neatly, civilized production 8). The original record, Neat, Accurate, fast, clear 9). Morale is high and coordinated 10). The service site, to convince people

There is a Chinese saying "People rely on clothing, horses are saddled", a custom and personalized packaging gets more popular in our life as a good display box for your products or gifts. Dongguan Mengyue Packaging Products Co., Ltd. we are specializing in the production of a variety of Cosmetic Paper Box,Paper Gift Box ,Paper Packaging Box,Paper Gift Bag,Adhesive label stickers, paper bags,paper box, gift boxes,jewelry box,brochures and other related products. With a wide variety of designs, our products are widely used in hardware, daily necessity, medicine, gift, cosmetic, health supply, stationery, electronic, toy, clothing and food industries. If you have any demand or question on packaging,welcome to contact us freely.

Today is an annual Christmas, but at the same time it means that 2018 is coming to an end. First of all, I wish all new and old customers a Merry Christmas. I also appreciate the support for our work in the past year. I hope that the cooperation will be happy in the coming year. We will serve you wholeheartedly. . I wish you and your family a wonderful holiday during the Christmas holidays.May this season of giving be the start of your better life. Have a great and blessed holiday! There are many our paper products in your Christmas,such as Christmas Greeting cards,Cardboard Paper Gift box,Sock shaped Paper Box,rigid gift box,etc.

The 24th batch of imported waste paper was announced, only 139,995 tons were approved. Only Shanying and Jianhui were approved. The total nuclear quantity this year has reached 18,146,296 tons, and the actual import volume of waste paper announced by the latest paper association is only 15.5 million tons means that there will be a gap between the quota and the actual imports.Book shaped paper box,Wine packaging Corrugated Box,Watch paper box Jiangxi Lifeng Paper will invest 170 million yuan to add a new high-watt packaging paper project with an annual output of 220,000 tons. It is expected to be carried out in two phases. Last week, the corrugated paper in the paper market changed. In the struggling state of overall paper prices, Xiaolong, Shanying and Lee & Man started to raise prices, which led to an increase in the price of cardboard. Asia Pacific Sempor announced that the November broad-leaf pulp offer was raised by 100/ton, and the exchange rate impact was the main factor. Yibin Paper started production of a 25,000-ton/year tissue machine on November 7. The Aceili paper machine has a width of 2.85 meters, a design speed of 1,800 meters per second, and a running speed of 1,600 meters per second. Previously, Yibin Paper had put into production of a similar type of tissue machine on September 15, and three more will be launched at the end of this year. Recently, the overall paper price continues to show a downturn, the market is upside down, the demand is flat, the channel information is obviously pessimistic, and the main motivation for accelerating cashing and reducing inventory becomes the channel.

With the development of B2B websites, merchandise a variety of products, in addition to good quality, but also need the right taste exquisite packaging, especially in an age of branding. So fine Cosmetic Box play an important role in value-added. Our cosmetic box make great effect on promotion in a large extent. It has eye-catching design, innovative design of the structure, vibrant colors, beautiful patterns clear. So that consumers see the cosmetic packing box(cosmetic packaging boxes) while it will have a very strong desire to buy your cosmetic. Then would you be interested in our cosmetic boxes? There are Eyelashes Box, Hair Box, Lipstick Box etc. If yes, let us approached exquisite cosmetic boxes: The customized sizes are available.

What a wonderful way to accessorize your Christmas Day for children with Christmas Gift Boxes Party Favor! Christmas Gift Boxes decorate your Christmas atmosphere. It is a best gift for children, friends when Christmas is coming! Custom Design Sock Shaped Christmas Gift Box in a special socks shape for Christmas gift to your little boy or girl,welcome printing your customized Christmas patterns on it. These little boxes make perfect gifts for the holiday.They were easy to put together, and they fill up nicely. got these to make home made gifts for the holidays. they were perfect, not too small and easy to assemble.

The dry cell film adhesive label material is a material that can shrink and deform the surface material. With the characteristics of heat shrinkage, the printed label can be heated at both ends after being labelled on the automatic labeling machine. After the shrinkage deformation, the naked dry battery is wrapped in the middle to form a complete dry battery product. Cell membrane adhesive printing machine processing methods are commonly the following methods: Flexographic printing method. North American and European label printing commonly used methods. Generally use uv ink or alcohol ink. Before the film material is printed, corona treatment is performed to increase the surface tension. Surface coating can also be used to improve the ink fastness. Ask for glazing after printing to protect images and texts. Water-based inks should not be used to prevent ink layer from being loose. Gravure printing method. For printing on ordinary gravure presses, use solvent or uv ink. The printed sticker is first divided into small rolls by a slitter and then die-cut, discharged and rewinded on the processing machine. Finally, it is cut into a single roll on the dedicated slitting machine to prepare the labeling machine. Gravure reverse printing. For separate printing methods. First, a graphic is printed on the back of a special transparent PVC film, and then vacuum-plated on the surface of the graphic to cover the text. In the second step, according to the adhesive material manufacturing process, the printed and aluminized PVC film is used as the material to manufacture the battery-specific adhesive label material. Finally, the entire process of label processing is completed on a label processing machine and a slitter after coating the processed large-volume battery film. Print coating method. Special process. After printing on PVC film, laminate a layer of PVC film on the surface. Can use a variety of printing methods. It is required that the shrinkage rate of the coating material be the same as the shrinkage rate of the printed material, and the tension between the two must be consistent when the film is covered. Most people use dry compound methods to ensure quality and reduce costs. Usually, the thickness of the PVC printing material is 0.035 mm, and the thickness of the coating material is 0.015 mm. UV letterpress printing. Recently, it was widely adopted in China and Southeast Asia. a method. Due to the use of UV oil, the surface tension of the PVC material is required to be maintained at 38 dyn/cm or more, and the printed surface is finally treated with a glazing process to protect the graphic.

The sticker adhesive is the medium between the label material and the bonding substrate and acts as a connection. According to the characteristics can be divided into two kinds of permanent and removable, adhesives have a variety of formulations for different surfaces and the use of the environment. Adhesives are the most important part of self-adhesive labeling technology and are key to the application of adhesive labels. Coating of adhesives The adhesive is generally cast-cast. The basic principle is that the adhesive is injected through the pressure of the coating head cavity. The tip of the coating head is an adjustable-size slit, which is coated with the base paper when coated. In operation, the adhesive is uniformly discharged from the slits of the coating head and coated on the surface of the base paper. The amount of coating can be adjusted by adjusting the slits. The amount of adhesive applied is the key to the performance of the self-adhesive material. The generally recommended coating weight is 24 g/m2 and the tolerance is ±3 grams. When the consistency of the adhesive changes, the overall coated grammage can be kept constant by adjusting the pressure. The advanced casting coating device feeds the coating thickness information back to the computer control device through the infrared scanning sensor, and after the analysis and processing, the relevant data is automatically adjusted to ensure the stability of the adhesive coating quality. The amount of adhesive applied should vary according to the season and the temperature and humidity of the area, and it can also be adjusted according to customer requirements. The general rule is that the amount of coating in the winter should be greater than the amount of coating in the summer. In winter, the use in the north is greater than in the south. For different substrate surfaces, the rough surface has a greater amount of coating than the smooth surface. The amount of coating is related to the adhesive strength of the material. In a certain range, the adhesive force is proportional to the coating amount. Excessively large and small amounts of binder can have a direct effect on the processing and storage of materials. Problems caused by excessive coating amount: Overfilling occurs: In the summer, especially in the end of the roll, sticking of the end face of the roll or sticking of the sheets together may result in waste. Cutting difficulties: The blade is easy to glue and stick to the paper and end faces, causing hidden troubles in the printing process. Difficulties in transporting paper on the press: Adhesives often adhere to the paperboard, affecting normal feeding and registration. When a label with an excessively large amount of glue is applied to the product, an overflow of glue may occur around the label, and a black border may be formed after the dust is adhered. When the temperature is high, the label appears to be misaligned on the product. Problems caused by too small a coating amount: Influencing the viscosity: The label is easily detached from the product, especially rough surfaces or large curvature surfaces. Influencing the material structure: The separation force between the surface material and the backing paper is too small to stratify the material, or the label is peeled off together with the waste paper edge during die-cutting and waste discharge, which affects the normal production. Sometimes the size of the coating should be adjusted according to the customer's needs. The label used in the supermarket requires a smaller amount of coating. But if you need to stick to a special surface such as rubber, you need to increase the amount of coating to strengthen the adhesion. Classification of adhesives According to different classification methods, adhesives can also be divided into different types. According to the coating technology can be divided into: hot sol type, solvent adhesives, emulsion adhesives; according to chemical composition can be divided into: rubber substrate, acrylic; according to the adhesive properties can be divided into: permanent, removable In addition to categories; according to the scope of application can be divided into: general-purpose, special sticky, medical, low temperature, high temperature and so on. Adhesive properties Initial viscosity: When the adhesive on the label is in contact with the substrate with a slight pressure, the adhesive effect of the adhesive on the substrate is referred to as the initial viscosity of the adhesive. When the label with a large initial viscosity touches the substrate, it immediately generates a large amount of adhesion, and a certain force is required to remove the label. After the label with a small initial viscosity touches the surface of the substrate, the adhesion is small and the label can be easily removed. For the determination of the initial viscosity, a tensile test method and a slant rolling method may be used. Final Viscosity: When the adhesive penetrates the surface of the substrate, the maximum adhesion that the label can obtain is called the final viscosity. The maximum final viscosity obtained depends on the strength of the adhesive, the roughness of the substrate surface, and the ambient temperature. The maximum viscosity after labeling is 2-24 hours. In general, there is no direct relationship between the initial viscosity and the final viscosity. Labels with higher initial viscosity do not necessarily have higher final viscosities. Shear strength: Shear strength is also called stickiness. It is an indicator of adhesive cohesion and indicates the softness of the adhesive. Adhesives with low shear strength have a greater tendency to flow, generally have higher initial viscosities, and greater tension is required to separate the label from the substrate. When the adhesive has a high adhesive strength, due to the higher cohesion, a lower initial viscosity is possible at this time, and the label is easier to separate from the substrate. The degree of flow of the adhesive not only affects its initial viscosity, but also determines the situation of overflowing glue around the label, which in turn affects the problems of contamination, adhesion, paper feeding, and double sheets in the printing process. Therefore, the shear strength must be controlled at a certain level. Within range. UV resistance: Determine the adhesive's ability to not lose adhesion and change color when exposed to UV light. Solvent resistance: The adhesive solvent is applied in a solvent environment without the ability to reduce the adhesion. Solvents include water, alcohol, petrochemical solvent, organic solvents, and plasticizers. These solvents are present in the label's application environment or substrate surface. Cold flow capacity: Indicates the ability of the adhesive to flow under room temperature conditions. Adhesives with good flowability are often low temperature or universal adhesives. Lowest labeling temperature: The lowest temperature of the surface of the substrate without losing its functionality. The lowest labeling temperature is determined by the "glass transition point" of the adhesive. Below the conversion point, the binder gradually crystallizes as the temperature decreases and hardens to a solid. The minimum temperature for labeling a typical acrylic adhesive is 0°C, and the minimum labeling temperature for a rubber substrate adhesive is -25°C. Application temperature range: refers to the temperature range where the adhesive reaches its maximum adhesion without changing its characteristics after the label is used. For acrylic adhesives, the application temperature range is -20 to 120°C, and the rubber substrate adhesive is -40 to 80°C. Apply the temperature range to the label's face material. The surface condition of the substrate is related to the ambient temperature, and different adhesives have different application temperature ranges. Permanent and removable adhesives Permanent adhesives are adhesives that make it difficult to peel off the entire label without damaging the surface of the label. Such as beer and most of the daily chemical products, stickers and anti-counterfeiting labels. Removable adhesives are adhesives that can be completely peeled off without damaging the bonded surface, such as stickers on sunglasses. Permanent and removable are actually just a relative concept. Permanent adhesives may become removable over time, and removable adhesives may become permanent over time. This has a lot to do with the properties of the adhesive, the condition of the adhesive surface, the length of time, and the environment in which it is used. Ultimately, it must be defined by experimentation.

Gift is a short-lived commodity. Deeply affected by festivals and consumer groups, it is basically a short, frequent, and fast product. Once it enters the market, it must demonstrate its ability to sell. Of course, if it wants to show its sales ability, it is not just relying on the placement and image of corporate advertising. The spread, more importantly, comes from the product itself, which itself includes product quality and packaging. Product quality is the premise, packaging is performance, interdependence, mutual existence. In practice, packaging design is performed within a limited picture, which is a spatial limitation. At the same time, the packaging is sold to the buyer for a short period of time, which is a limitation of time. This kind of space-time restrictions requires that packaging design cannot be blind and complete, and that everything should be equal to nothing. The key to the determination of the goods, consumption, and sales of the three aspects of the relevant information to compare and select, the basic point of choice is to help improve sales. Below is a list of relevant items that will be identified by the editors of China Packaging Network for reference. The trademark image of the product, the meaning of the brand; The product's functional utility, texture properties; The origin of the product, local factors; The selling background of the commodity, the target of consumption; The difference between the product and the current product; The status of similar packaging design for this product; The product has a total of its related characteristics and so on. China Packaging Network editor reminds everyone that these are the media information of design ideas. When designing as much as possible to understand the relevant information, to compare and select, and then determine the focus of performance. Therefore, designers are required to have a wealth of knowledge and cultural knowledge related to commodities, markets, and living. The more you accumulate, the wider the conception of the world, the more paths you have, and the more basic your choice of key points. First, the performance angle This is a deepening after determining the form of expression, that is, there must be a concrete breakthrough after finding the main target. If the trademark or brand is the focus of performance, it is a manifestation of the image, or a certain meaning possessed by the performance of the brand. If the product itself is the focus of performance, it is an external image of the product or an internal property of the product. The co-compositions still show their functional utility; things all have different perspectives of understanding and are more focused on one aspect in performance, which will benefit the expressiveness of performance. Second, the performance method Just as the performance focus and performance perspective is like the goal and the breach, the performance technique can be said to be a tactical issue. The focus and perspective of performance are mainly to resolve what is being performed. This is only half the problem solved. Good performance techniques and expressions are the vitality of design. Regardless of how they behave, they must express some characteristics of content and performance. In a broad sense, everything must have its own particularity. Anything must have a certain connection with some other things. In this way, to represent a thing, to represent an object, there are two basic techniques: one is to directly express certain features of the object, and the other is to express things indirectly through other things related to the object. The former is called direct performance, while the latter is called indirect performance or called performance. According to the editor of China Packaging Network, the concept is the soul of design. It is difficult to formulate formulas such as fixed conception methods and conceiving procedures in design creation. Most of the creation is from immature to mature. In this process, some or none of them are affirmative. It is a normal phenomenon to modify or add some. The core of the idea is to think about what and how to represent two issues. To answer these two questions, we must address the following four points: performance focus, performance perspective, performance techniques, and forms of expression. As in combat, the emphasis is on attacking targets, the angle is the breakthrough, the tactics are tactics, and the forms are weapons. Any one of these links will be handled in a bad manner.

The jewelry box is almost as important as what is inside it. It may not cost the same price as what is inside it, it can really be sentimentally important to some people as it can be handed down to family members as a gift. People have been wearing jewelry for thousands of years now. From the Indians, to Egyptians, to Greeks and Romans, jewelry has really been a very important commodity for people. Its represents more than just social status but also beauty and elegance. So to keep it safe and beautiful for a longer time, it is kept inside a box that can protect the stones and withstand time. Some jewelry boxes are handmade and sold in antique shops, and it can be really expensive. Now, it can be bought in specialty stores and finery shops. If you want to purchase one for yourself or for someone, buy a box that is within your or his or her interest. There are various kinds of box available in the market, it also come in various colors and themes. Ballerina, dolphins and Disney characters are the most popular design. Traditional wooden box is also very good depending on anyone's interest. When you buy a jewelry box, make sure it has a good quality no matter what material it is made up of. Cheap boxes are usually low quality, six months is its estimated lifetime, after it, expect the materials to falls apart. This is obviously not good, especially if you are planning to give it to someone. $50 can buy a decent box if your just patient in searching for it online. You can never go wrong with handmade antique jewelry box too. Music boxes can be very expensive and should be well taken care of to make it last longer. A good box is durable even if it has lots of moving parts. Just by looking at its material, you can easily spot which is better jewelry and which is not.

You may be wondering why there is such a wide selection for something as specialized as a watch box. That's because something as special as a watch definitely deserves a place of its own. Also, if you have a large collection of watches its unreasonable to expect them to simply do with the couple of spaces that may be given to them in a standard jewelry box. A watch box is a much better solution, especially if one has a wide range of watches that may be suited to different occasions and/or environments. One may have watches for work, for athletic pursuits, heirloom antiques received from a father or grandfather. A collection this varied warrants a cases. The best way to store a box is on a cushion which the box can wrap around. A piece of machinery as impressively designed as a watch needs and deserves such a careful and appropriate storage method. A box contains several compartments with such cushions; some have as many as forty. A jewelry box, as already stated, might have some space for one or two watches, but this may not be enough for your entire collection. It's hardly fair, of course, so give such VIP treatment to a couple of watches while the rest are languishing in sub-par storage. Jewelry boxes are great at keeping jewelry pristine, shiny and in perfect condition. A jewelry box does the same for watches and of course is designed with boxes in mind. With a watch box, all your watches get equal storage rights. Whether the watch is old, new, or somewhere in between, being kept in will keep it running like the precision machine that it's meant to be. A watch box is so much more than a series of drawers in which watches get thrown willy-nilly. Each watch is given its own compartment and cushion so no watch is left behind and each one is kept in equally perfect condition and working order. With a watch box in your home, you won't have to worry about where you keep your watches, just as a jewelry box answers the question of where you keep your jewelry. Jewelry are also very frequently received gifts so its likely you'll need a bit of space not only for currently owned boxes but watches in potential. A watch box gives watches (and their owners) just what they need. A special place built with them in mind and designed with their specific qualities and needs in mind.

To make Valentine's Day gifts look instantly tall, as long as the world's top designer works, luxury goods, technology products, packaging ... from them to sum up some characteristics to imitate. I know that everyone`s time is precious, so I`m doing my best to help you summarize it. There are three key words: minimalism, contrast, and grayscale. Of course, there are also maverick or ingenious things like Yayoi Kusaka. Therefore, I do not intend to argue this sentence. I have a lot of creative ideas, but I prefer to provide operative solutions. How to choose the box The order of forcing the box is as follows: ) World cover> Flip cover> General paper box ) Hard Paper Box> Soft Paper Box> Corrugated Paper Box )Rectangle>Circular>Other shapes>Heart-shaped (Heart-shaped box is definitely one of the lowest in history, not one, do not explain) How to choose wrapping paper and ribbon First of all, the packaging paper that I said was all paper-based. It definitely did not include candy paper, plastic paper, and cellophane that would reflect light. Into the title. 1) Solid color wrapping paper + Pure color ribbon is best in cool and neutral colors (black, white, rice, coffee, blue, green, purple, note that the color saturation should not be too high) Is it Tiffany's feel! On this basis, you can insert a small card or a dried flower in the knotted place (even if the ribbon flower or plastic flower is used). Note that the card and the dried flower are only decorative, the smaller one is better, and do not take over the main one. This is the simplest and foolproof, and all hand-remnant stars, small fresh-improvement obstacle stars, and taste are always given by Tucao Xingren. This is enough. 2) Solid color wrapping paper + color ribbon The so-called color ribbons do not allow you to choose flowers, but work hard on the texture and texture of the ribbons. You can choose from a variety of ribbons of different materials mix and match, you can also choose to have dark lines, velvet, embroidery, hot stamping (embroidered and perm if custom made it more forced grid bracket laughter) ... principle remains Is based on cool colors or neutral colors. 3) Solid color wrapping paper + color wrapping paper With the special texture and texture of the packaging paper to replace the ribbon as a feminine thing as a decoration, simple and capable, handsome, very suitable for packaging gifts for boys. It can be very good to do well, but it requires a strong ability to match colors and textures. If you can't do it well... it's just like (⊙ _⊙ ). The principle is that the solid color is used as the background color and the color is used as the decorative color. Both The main colors are the same kind of colors (having similar hue and different shades). Give a correct demonstration (blue): 4) Color Packing Paper + Flower / Solid Ribbon 5) Wrapping paper + other ornaments Choose a simple, yet texture-free wrapping paper as the background color, and decorate the sculpted bouquets or other decorations.

Holiday gifts and mutual gifts between friends and family have become an essential part of communication. Today's gift box is more and more refined and beautiful, so the gift box ribbon packaging process and color requirements have also been a great change, then, the color of the gift packaging have any effect? The first thing to do is to work fine, and again the colors should be varied. Usually, a gift box of a style not only has 4 basic colors but also several spot colors, such as gold and silver, which are spot colors. Color is very important, and bright and vivid colors give people a warm and comfortable feeling. If the national language of color design is responsible or diversified, it will weaken the grade of gifts in a certain form, and it will also give consumers a sense of loss of dignity. Gift box packaging method color is the key, choose the color of the ribbon, gold and silver are wild colors; several double bows overlap each other, then the gold or silver support is the most beautiful. As for ribbons, it is also necessary to match the color of wrapping paper. Gift ribbons are best used as much as possible on the wrapping paper. The same color can be selected. If the wrapping paper is purple, the ribbon can be purple and blue. Colorful outfits can be seen everywhere on beautiful garments. In the era of color, fragrance, and taste, ribbons are quietly on the packaging of gifts. On special occasions such as holiday birthdays, the beautiful gifts escorted by friends are People can't help but walk on the lively streets. The various little things made of ribbons make your life easier. Beautiful ribbon souvenirs can make people feel impressive while they can help others. Brought you an unexpected surprise! Gift box packaging is particularly important, because the gift box is not only to enhance the quality of gifts, but also the corporate image and corporate content spokesperson, a good gift box design and printing not only in a certain form can improve the grade of the gift but also get the corresponding Advertising. For more information, you are welcome to continue to pay attention to China Packaging Network!

Wrapping paper, Christmas trees, plastic bags and more: Americans generate about 25 percent more waste than usual during the holidays, from Thanksgiving Day to New Year's Day, according to the federal Environmental Protection Agency. Much of it will clog landfills, but some can be recycled, reused, donated or even composted. Here are a few tips: 1. What to do with packaging Bubble wrap and packing peanuts can't be recycled, but these materials can be reused. Many shipping businesses will take them, too. Gift-wrap paper can be recycled if it doesn't have foil or glitter. Otherwise, it goes in the trash if not reused. Ribbons and bows also can't be recycled but can be reused. As a general rule, if you can easily rip wrapping paper, it's probably fine to recycle, said Tricia Ponce de Leon, general manager overseeing trash hauling and recycling in metro Phoenix for Republic Services. Cardboard boxes can be recycled but should be flattened. Envelopes and paper cards can be recycled along with all the junk paper mail you receive over the holidays. Another option: Send electronic cards rather than the paper variety. Phoenix-based Republic Services collects residential trash in Anthem, Buckeye, Fountain Hills and other parts of the Valley. Some 18,000 tons of recycled material gets processed each month in three Valley plants operated by the company. 2. What to do with food-related items Many food and beverage containers can be recycled, but make sure the items are empty, clean and dry. Plastic bottles usually can be recycled but not the lids, unless they are at least 3 inches in diameter. An ongoing problem for recycling operations involves food contamination, said Ponce de Leon. For example, a plastic bottle with ketchup residue, when crushed, will spill the goo onto other recycled materials, she said. "Even without the holidays, there's a lot of contamination," she said. Glass bottles can and should be recycled, especially as they might take around 1 million years to break down naturally, according to CalRecycle, California's state-government recycling program. Plastic bottles, by contrast, can take 700 years to decompose. For aluminum cans, it's 80 to 100 years. Food waste generally must be discarded in the trash, but you can try composting it, especially fruits and vegetables for use later as a soil additive. Composting reduces methane-gas landfill emissions and can enrich your soil. The EPA offers general home-composting tips at epa.gov/recycle/composting-home. 3. Disposing of odds and ends Plastic grocery bags can be recycled but it's best to bag them together rather than discard them individually. Many supermarkets and retailers have bag drop-off bins, usually near the front entrance. Better yet: Bring reusable bags when hitting the stores. "(Loose) grocery plastic bags are really hard on equipment," said Ponce de Leon. They can get stuck in belts and other moving machine parts. RELATED: Bisbee must repeal plastic-bag ban or lose funding, Arizona AG says Used plastic gift cards and credit cards go in the trash rather than the recycling bin. (Cut up credit cards if the account is still active, as a fraud-prevention measure.) Broken ornaments and dishes also go in the trash. However, still-usable ornaments and other decorations that you no longer like can be donated. There's a good chance you might receive an electronic gift (or two). If you're getting rid of old electronics, take them to special household hazardous-waste collection sites or events rather than tossing them in the trash. Many cities host these events from time to time. Used batteries also should be discarded in this manner rather than thrown in the trash. Better yet: Buy batteries that can be recharged. 4. And finally, what to do with the tree Christmas trees and wreaths can be dropped off for composting at collection sites around the Phoenix metro area right after Christmas. Tinsel, decorations and nails/metal stakes should be removed, and trees and wreaths shouldn't be bagged. Phoenix, for example, will collect discarded trees at more than a dozen parks and a few other locations from Dec. 26 to Jan. 7. Many other Valley cities have similar programs. Some cities, such as Chandler, say they will accept live potted Christmas trees for replanting in city parks. Discarded trees dropped off at compost-collection centers are chipped up and used in landscaping as mulch. Some places around the nation even use discarded trees as soil-erosion barriers or as fish havens in ponds, according to the National Christmas Tree Association.